POST checks/url-v2

Creates a new URL check (version 2).

Remarks

Use GET checks/url-v2/locations route to get the list of values applicable for location_code.
Use GET groups route to get sub-groups ids applicable monitor_groups_ids.
Use GET timezones route to get list of timezones timezone.

Check can include content verification: it fails if response content doesn’t match the content_pattern.
Content verification can be literal (content_pattern_type = 'literal') or regular expression (content_pattern_type = 'regex').
The field content_pattern_case_sensitive indicates whether content verification is case-sensitive or not. If not specified than default value is false.

Thresholds

There is a set of properties (each starts with threshold_) used for thresholds definition. Read more on thresholds here.

Scheduled Inclusion/Exclusion

The scheduled_inclusion and scheduled_exclusion parameters define specific day/time ranges when the check will run or not run respectively.
If no value specified (or null) it means 'always' for scheduled_inclusion and 'none' for scheduled_exclusion. Read more on the schedule syntax here.

Interval

The interval_seconds field defines the frequency of running check. If no value specified (or null), the check will run with default interval. Set interval_seconds = 0 if the check should run manually.

Returns HTTP 201 when created (the Location header must contain URL to the new check).

Request example and description

curl --request POST "https://api-asm1.apica.io/v3/checks/url-v2?auth_ticket=C471ADC4-19B4-4219-BBF4-671A97EC653E" --header "Content-Type: application/json" --data-raw "{
  \"Timeout\": 1,
  \"ConnectionTimeout\": 1,
  \"url\": \"https://cldemo.apica.io/\",
  \"content_pattern_type\": \"literal\",
  \"content_pattern\": \"ok\",
  \"content_pattern_case_sensitive\": false,
  \"request_method\": \"GET\",
  \"post_data\": \"{ \\"check_id\\": 12345}\",
  \"custom_hdrs\": {
    \"X-check-id\": \"12345\",
    \"X-private-req\": \"true\"
  },
  \"max_redirects\": 3,
  \"disable_certificate_verification\": true,
  \"authentication\": {
    \"type\": \"basic\",
    \"username\": \"user\",
    \"password\": \"pass\"
  },
  \"proxy\": {
    \"type\": \"none\",
    \"host\": \"10.211.55.4\",
    \"port\": \"1080\",
    \"auth_type\": \"none\",
    \"username\": \"user\",
    \"password\": \"pass\"
  },
  \"VerifyPort\": \"sample string 1\",
  \"Enabled\": 1,
  \"AcceptedCodes\": \"sample string 2\",
  \"CodeSev\": \"sample string 3\",
  \"ReqHdrs\": true,
  \"RspHdrs\": true,
  \"SecureProtocolVersion\": \"sample string 4\",
  \"Http2\": true,
  \"Timezone\": 1,
  \"fail_over\": true,
  \"name\": \"Test check\",
  \"description\": \"It is a test check.\",
  \"monitor_groups_ids\": [
    34,
    35,
    36
  ],
  \"interval_seconds\": 3600,
  \"interval_manual\": true,
  \"max_attempts\": 3,
  \"attempt_pause\": 30000,
  \"location_code\": \"b8dce6d7-2222-1111-92e9-4a98eb706b13|europe.northern-europe.se.na.stockholm.ipv6-aaaaa|chromium|87\",
  \"secondary_location_codes\": null,
  \"check_fail_severity\": \"F\",
  \"threshold_w\": 15000,
  \"threshold_w_set_0\": true,
  \"threshold_w_dynamic\": {
    \"baseline_measure\": \"avg\",
    \"baseline_period_h\": 2,
    \"factor\": 2.0,
    \"offset\": 0
  },
  \"threshold_e\": 25000,
  \"threshold_e_set_0\": false,
  \"threshold_e_dynamic\": {
    \"baseline_measure\": \"avg\",
    \"baseline_period_h\": 2,
    \"factor\": 2.0,
    \"offset\": 0
  },
  \"threshold_lo_w\": 5000,
  \"threshold_lo_w_set_0\": true,
  \"threshold_lo_w_dynamic\": {
    \"baseline_measure\": \"avg\",
    \"baseline_period_h\": 2,
    \"factor\": 2.0,
    \"offset\": 0
  },
  \"threshold_lo_e\": 10000,
  \"threshold_lo_e_set_0\": false,
  \"threshold_lo_e_dynamic\": {
    \"baseline_measure\": \"avg\",
    \"baseline_period_h\": 2,
    \"factor\": 2.0,
    \"offset\": 0
  },
  \"tags\": [
    1,
    2,
    3
  ],
  \"scheduled_inclusion\": \"mon-fri: 21:30-22; sun:15-17; 0-1:12-18; 2012-04-01-2012-04-30:18-23\",
  \"scheduled_exclusion\": \"mon-fri: 21:30-22; sun:15-17; 0-1:12-18; 2012-04-01-2012-04-30:18-23\",
  \"target_sla\": 0.9,
  \"target_sla_2\": 0.9,
  \"verify_ping\": \"fast.com\",
  \"CheckID\": 6,
  \"CheckGUID\": \"61b0ee15-db91-4cfb-bae0-2f88d6dfcd8b\"
}"

Name	Type	Required	Description
url	String	Yes	URL.
content_pattern_type	String	No	Response Content Verification Type. Available values: 'literal', 'regex'. Regex performs matching against the content with Regular Expressions. Literal matches using a basic string.
content_pattern	String	No	Content pattern.
content_pattern_case_sensitive	Boolean	No	Case sensitive content pattern. Enabling this option will make the Response Content Verification Pattern case sensitive.
request_method	String	No	HTTP request method.
post_data	String	No	Data for POST request.
custom_hdrs	Object	No	Request headers.
max_redirects	Integer	No	Maximum number of redirects.
disable_certificate_verification	Boolean	No	Disable Certificate Verification.
authentication	Object	No	Authentication data.
type	String	No	Authentication type. Available values: 'none', 'basic'.
username	String	No	Username.
password	String	No	Password.
proxy	Object	No	Proxy data.
type	String	No	Proxy type. Available values: 'none', 'http', 'socks4', 'socks5'.
host	String	No	Proxy (DNS) hostname or TCP/IP address.
port	String	No	Proxy TCP/IP port number.
auth_type	String	No	Proxy authentication type. Available values: 'none', 'basic', 'digest'.
username	String	No	Proxy authentication username.
password	String	No	Proxy authentication password.
VerifyPort	String	No	Verify port.
Enabled	Integer	No	Enabled. Default value is 1.
AcceptedCodes	String	No	Accepted codes. Default value is 200.
CodeSev	String	No	Code severity. Default value is F.
ReqHdrs	Boolean	No	Store Request Headers. Default value is true.
RspHdrs	Boolean	No	Store Response Headers. Default value is true.
SecureProtocolVersion	String	No	Secure protocol version. Available values: 'default', 'sslv3', 'tlsv1'
Http2	Boolean	No	Enable HTTP2.
Timezone	Integer	No	Timezone where check will run
fail_over	Boolean	No	With Failover enabled the check will be executed on a second location if the result is not OK (Information). Only one attempt will be made from the failover location.
name	String	Yes	The name of the check.
description	String	No	The check description.
monitor_groups_ids	Array	No	ID of monitor groups in which a check will be included.
interval_seconds	Integer	No	Check run interval in seconds.
interval_manual	Boolean	No	The flag indicating whether check runmode is manual or interval.
max_attempts	Integer	No	The max number of attempts that can be made to verify the results. This setting applies to the primary location only, not any failover locations. Available values: from 1 to 5.
attempt_pause	Integer	No	Between every attempt there will be an Attempt Pause before the next attempt is performed. Milliseconds. Available values : 0, 50, 100, 200, 500, 1000, 2000, 3000, 5000, 10000, 20000, 30000, 60000.
location_code	String	Yes	The check run location.
secondary_location_codes	Array	No	Currently not supported.
check_fail_severity	String	No	This will be the Severity that the check will get if it fails. This can be used to trigger a different Severity (and at the end, different alerts). I - Information, W - Warning, E - Error, F - Fatal. Default is F.
threshold_w	Integer	No	The value of high warning threshold. If not specified then no threshold.
threshold_w_set_0	Boolean	No	The flag indicating whether or not the high warning threshold should be set to 0.
threshold_w_dynamic	Object	No	The object for configuring dynamic calculation of high warning threshold. If not specified then no dynamic calculation.
baseline_measure	String	Yes	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	Yes	The period in hours for calculation depending on the specified baseline.
factor	Float	Yes	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
threshold_e	Integer	No	The value of high error threshold. If not specified then no threshold.
threshold_e_set_0	Boolean	No	The flag indicating whether or not the high error threshold should be set to 0.
threshold_e_dynamic	Object	No	The object for configuring dynamic calculation of high error threshold. If not specified then no dynamic calculation.
baseline_measure	String	Yes	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	Yes	The period in hours for calculation depending on the specified baseline.
factor	Float	Yes	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
threshold_lo_w	Integer	No	The value of low warning threshold. If not specified then no threshold.
threshold_lo_w_set_0	Boolean	No	The flag indicating whether or not the low warning threshold should be set to 0.
threshold_lo_w_dynamic	Object	No	The object for configuring dynamic calculation of low warning threshold. If not specified then no dynamic calculation.
baseline_measure	String	Yes	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	Yes	The period in hours for calculation depending on the specified baseline.
factor	Float	Yes	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
threshold_lo_e	Integer	No	The value of low error threshold. If not specified then no threshold.
threshold_lo_e_set_0	Boolean	No	The flag indicating whether or not the low error threshold should be set to 0.
threshold_lo_e_dynamic	Object	No	The object for configuring dynamic calculation of low error threshold. If not specified then no dynamic calculation.
baseline_measure	String	Yes	The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'.
baseline_period_h	Integer	Yes	The period in hours for calculation depending on the specified baseline.
factor	Float	Yes	The percentage of the average/median return value or standard deviation of the return value.
offset	Integer	No	The period's offset in hours.
tags	Array	No	List of tag IDs.
scheduled_inclusion	String	No	Inclusion Periods (Default: always).
scheduled_exclusion	String	No	Exclusion Periods (Default: none).
target_sla	Float	No	Sets a 1st Target SLA in percentage e.g. 99.5 or 99. This is used in certain types reports. Set 0 to reset the value.
target_sla_2	Float	No	Sets a 2nd Target SLA in percentage e.g. 99.5 or 99. This is used in certain types reports. Set 0 to reset the value.
verify_ping	String	No	After a failed result, verify connection against this hostname with a ping request.
CheckID	Integer	No	No documentation available.
CheckGUID	Guid	No	No documentation available.
Timeout	Integer	No	Timeout. Default value is 45.
ConnectionTimeout	Integer	No	Connection timeout. Default value is 10.