POST checks/ping
Creates a new Ping check.
Remarks
Use GET checks/ping/locations route to get the list of values applicable for location_code.Use GET groups route to get sub-groups ids applicable monitor_groups_ids.
Thresholds
There is a set of properties (each starts with threshold_) used for thresholds definition. Read more on thresholds here.Scheduled Inclusion/Exclusion
The scheduled_inclusion and scheduled_exclusion parameters define specific day/time ranges when the check will run or not run respectively.If no value specified (or null) it means 'always' for scheduled_inclusion and 'none' for scheduled_exclusion. Read more on the schedule syntax here.
Interval
The interval_seconds field defines the frequency of running check. If no value specified (or null), the check will run with default interval. Set interval_seconds = 0 if the check should run manually.Returns HTTP 201 when created (the Location header must contain URL to the new check).
Request example and description
curl --request POST "https://api-asm1.apica.io/v3/checks/ping?auth_ticket=C471ADC4-19B4-4219-BBF4-671A97EC653E" --header "Content-Type: application/json" --data-raw "{
\"host\": \"host\",
\"name\": \"Test check\",
\"description\": \"It is a test check.\",
\"monitor_groups_ids\": [
34,
35,
36
],
\"interval_seconds\": 3600,
\"interval_manual\": true,
\"max_attempts\": 3,
\"attempt_pause\": 30000,
\"location_code\": \"b8dce6d7-2222-1111-92e9-4a98eb706b13|europe.northern-europe.se.na.stockholm.ipv6-aaaaa|chromium|87\",
\"secondary_location_codes\": null,
\"Timezone\": 1,
\"check_fail_severity\": \"F\",
\"threshold_w\": 15000,
\"threshold_w_set_0\": true,
\"threshold_w_dynamic\": {
\"baseline_measure\": \"avg\",
\"baseline_period_h\": 2,
\"factor\": 2.0,
\"offset\": 0
},
\"threshold_e\": 25000,
\"threshold_e_set_0\": false,
\"threshold_e_dynamic\": {
\"baseline_measure\": \"avg\",
\"baseline_period_h\": 2,
\"factor\": 2.0,
\"offset\": 0
},
\"threshold_lo_w\": 5000,
\"threshold_lo_w_set_0\": true,
\"threshold_lo_w_dynamic\": {
\"baseline_measure\": \"avg\",
\"baseline_period_h\": 2,
\"factor\": 2.0,
\"offset\": 0
},
\"threshold_lo_e\": 10000,
\"threshold_lo_e_set_0\": false,
\"threshold_lo_e_dynamic\": {
\"baseline_measure\": \"avg\",
\"baseline_period_h\": 2,
\"factor\": 2.0,
\"offset\": 0
},
\"tags\": [
1,
2,
3
],
\"Enabled\": 1,
\"scheduled_inclusion\": \"mon-fri: 21:30-22; sun:15-17; 0-1:12-18; 2012-04-01-2012-04-30:18-23\",
\"scheduled_exclusion\": \"mon-fri: 21:30-22; sun:15-17; 0-1:12-18; 2012-04-01-2012-04-30:18-23\",
\"target_sla\": 0.9,
\"target_sla_2\": 0.9,
\"verify_ping\": \"fast.com\",
\"CheckID\": 1,
\"CheckGUID\": \"73927080-a48f-417e-8fe1-5964789f3378\"
}"
| Name | Type | Required | Description |
|---|---|---|---|
| host | String | Yes |
Host. |
| name | String | Yes |
The name of the check. |
| description | String | No |
The check description. |
| monitor_groups_ids | Array | No |
ID of monitor groups in which a check will be included. |
| interval_seconds | Integer | No |
Check run interval in seconds. |
| interval_manual | Boolean | No |
The flag indicating whether check runmode is manual or interval. |
| max_attempts | Integer | No |
The max number of attempts that can be made to verify the results. This setting applies to the primary location only, not any failover locations. Available values: from 1 to 5. |
| attempt_pause | Integer | No |
Between every attempt there will be an Attempt Pause before the next attempt is performed. Milliseconds. Available values : 0, 50, 100, 200, 500, 1000, 2000, 3000, 5000, 10000, 20000, 30000, 60000. |
| location_code | String | Yes |
The check run location. |
| secondary_location_codes | Array | No |
Currently not supported. |
| Timezone | Integer | No |
Timezone where check will run |
| check_fail_severity | String | No |
This will be the Severity that the check will get if it fails. This can be used to trigger a different Severity (and at the end, different alerts). I - Information, W - Warning, E - Error, F - Fatal. Default is F. |
| threshold_w | Integer | No |
The value of high warning threshold. If not specified then no threshold. |
| threshold_w_set_0 | Boolean | No |
The flag indicating whether or not the high warning threshold should be set to 0. |
| threshold_w_dynamic | Object | No |
The object for configuring dynamic calculation of high warning threshold. If not specified then no dynamic calculation. |
| baseline_measure | String | Yes |
The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'. |
| baseline_period_h | Integer | Yes |
The period in hours for calculation depending on the specified baseline. |
| factor | Float | Yes |
The percentage of the average/median return value or standard deviation of the return value. |
| offset | Integer | No |
The period's offset in hours. |
| threshold_e | Integer | No |
The value of high error threshold. If not specified then no threshold. |
| threshold_e_set_0 | Boolean | No |
The flag indicating whether or not the high error threshold should be set to 0. |
| threshold_e_dynamic | Object | No |
The object for configuring dynamic calculation of high error threshold. If not specified then no dynamic calculation. |
| baseline_measure | String | Yes |
The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'. |
| baseline_period_h | Integer | Yes |
The period in hours for calculation depending on the specified baseline. |
| factor | Float | Yes |
The percentage of the average/median return value or standard deviation of the return value. |
| offset | Integer | No |
The period's offset in hours. |
| threshold_lo_w | Integer | No |
The value of low warning threshold. If not specified then no threshold. |
| threshold_lo_w_set_0 | Boolean | No |
The flag indicating whether or not the low warning threshold should be set to 0. |
| threshold_lo_w_dynamic | Object | No |
The object for configuring dynamic calculation of low warning threshold. If not specified then no dynamic calculation. |
| baseline_measure | String | Yes |
The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'. |
| baseline_period_h | Integer | Yes |
The period in hours for calculation depending on the specified baseline. |
| factor | Float | Yes |
The percentage of the average/median return value or standard deviation of the return value. |
| offset | Integer | No |
The period's offset in hours. |
| threshold_lo_e | Integer | No |
The value of low error threshold. If not specified then no threshold. |
| threshold_lo_e_set_0 | Boolean | No |
The flag indicating whether or not the low error threshold should be set to 0. |
| threshold_lo_e_dynamic | Object | No |
The object for configuring dynamic calculation of low error threshold. If not specified then no dynamic calculation. |
| baseline_measure | String | Yes |
The baseline for calculating dynamic threshold. Available values: 'avg', 'mdn', 'std'. |
| baseline_period_h | Integer | Yes |
The period in hours for calculation depending on the specified baseline. |
| factor | Float | Yes |
The percentage of the average/median return value or standard deviation of the return value. |
| offset | Integer | No |
The period's offset in hours. |
| tags | Array | No |
List of tag IDs. |
| Enabled | Integer | No |
Enabled. Default value is 1. |
| scheduled_inclusion | String | No |
Inclusion Periods (Default: always). |
| scheduled_exclusion | String | No |
Exclusion Periods (Default: none). |
| target_sla | Float | No |
Sets a 1st Target SLA in percentage e.g. 99.5 or 99. This is used in certain types reports. Set 0 to reset the value. |
| target_sla_2 | Float | No |
Sets a 2nd Target SLA in percentage e.g. 99.5 or 99. This is used in certain types reports. Set 0 to reset the value. |
| verify_ping | String | No |
After a failed result, verify connection against this hostname with a ping request. |
| CheckID | Integer | No |
No documentation available. |
| CheckGUID | Guid | No |
No documentation available. |